Welcome, Guest. Please Login.
UK Vans RV Forum
Welcome to the UK Vans RV Pilots & Builders Forum.
13.05.2024 at 21:47:09
News: Welcome to the UK Vans Builder & Pilot Forum. Here you will be able to contact past and present RV builders.
Home Help Search Login


UK Vans RV Builder & Pilot Forum › Vans RV Discussion › Vans RV Construction
(Moderator: Administrator) - (Moderator Group: RV Moderator) 		‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Wing Spar and Attach Angles - Priming? (Read 2437 times)
Anthony_Watkins
YaBB Newbies
*


Why not describe
your RV construction
experience?

Posts: 3
Wing Spar and Attach Angles - Priming?
07.01.2012 at 16:27:17  
Evening all
 
I am in the process of mocking up my RV12 wings before dissasembling and priming them.  The Spar is anodised and I therefore pressume that it does not need priming.   However. what about the Large Rivets that go through the spar as well as the attach angles that are already attached to the spar?  Should these need some sort of extra protection?.....or am I worrying too much?
 
Anthony
Back to top
 
 
Email   IP Logged
Mike Newall
Senior Member
****


A330 Capt, Builder,

Posts: 264
Re: Wing Spar and Attach Angles - Priming?
Reply #1 - 07.01.2012 at 21:31:54  
Yep.......  Wink
Back to top
 
 
7 Flying !, 8 in both workshops. Next one will be quicker, simpler, better. But they all say that, don't they ?
Email   IP Logged
Pages: 1
Send Topic Print
UK Vans RV Builder & Pilot Forum › Vans RV Discussion › Vans RV Construction
(Moderator: Administrator) - (Moderator Group: RV Moderator) 		‹ Previous topic | Next topic ›

UK Vans RV Builder & Pilot Forum » Powered by YaBB 2.1!
YaBB © 2000-2005. All Rights Reserved.

Valid XHTML Valid CSS Powered by Perl Source Forge